Flamethrowers are legal federally in the United States. The only state-level restriction we observe in shipping: we do not ship to Maryland.Made in USA · Free Shipping · Lifetime Warranty
TF-19 WASP Gen2: Flamethrower Drone Attachment
$1,599.00
TF-19 Gen2 now shipping!
The TF-19 WASP is a drone-mounted flamethrower attachment for industrial, agricultural, and entertainment applications.
- 30ft range
- 1-gallon fuel capacity
- 100 seconds of firing time
Free Shipping
Lifetime Warranty
Made in USA
Secure Checkout
In Stock
FAQ
What drones is the TF-19 compatible with?
The TF-19 is designed to be broadly adaptable — it mounts to most heavy-lift cinema and industrial drone platforms with minimal user fabrication. Recommended platforms include:
- DJI S1000
- DJI Matrice 600 / M600 Pro
- Most other heavy-lift drones designed to carry gimbal or cinema-camera payloads
The TF-19 mounts via two 12mm-OD × 500mm rods (included), spaced approximately 195mm apart at the drone interface. This is the same rail standard used by gimbal and camera mounts on most heavy-lift drones, which is why drone-side hardware usually already exists for it. The included sliding rail clamp lets you adjust position along the rods to balance the system over your drone’s center of gravity, and slide the assembly forward for ground refueling without removing it.
Note: drone payload capacity should be 10 lbs or more. The TF-19 is ~5 lbs empty, but a full 1-gallon gasoline tank brings total flight weight close to 10+ lbs.
What's included? Does this come with a drone?
The drone is NOT included. The TF-19 is an attachment only. You’ll need a heavy-lift drone with at least 10 lb payload capacity to operate it (see compatibility above).
Each TF-19 ships with:
- TF-19 WASP Gen 2 attachment, fully assembled
- Two 12mm-OD × 500mm mounting rods
- Instruction and spec sheet
What are the performance specs?
- Max range: 30 ft (20% greater than Gen 1)
- Fuel capacity: 1 gallon
- Continuous trigger time: ~100 seconds per fill
- Empty weight: 5.08 lbs (7% lighter than Gen 1)
- Ignition: Plasma arc — instant-on spark electrodes
- Mounting: Two 12mm-OD × 500mm rods, ~195mm spacing
What fuel does the TF-19 use?
The TF-19 runs on standard gasoline — available at any gas station. That’s all most operators need.
Some users mix in up to 50% diesel with the gasoline to slow the burn — diesel is oilier and clings to surfaces better. For prescribed burns, brush clearing, and most agricultural work, gasoline alone is the simplest fuel.
How long does shipping take, and what does it cost?
Free UPS Ground shipping on the TF-19 within the U.S. In-stock units ship the same or next business day from our facility in Cleveland, Ohio, with most U.S. deliveries arriving in 1–5 business days. Tracking is emailed when the order ships.
Is the TF-19 legal in my state?
Flamethrowers are legal federally in the United States. The only state-level restriction we observe in shipping: we do not ship to Maryland.
For more details, visit our FAQ page.
Aerial Firepower, Engineered.
The TF-19 WASP Gen 2 is a drone-mounted flamethrower attachment built for remote ignition of aerial and ground targets. Industrial agriculture, wildland fire management, power-line clearing, pest control, and entertainment SFX all become safer and more efficient when the operator stays on the ground.
- 30 ft max range (20% greater than Gen 1)
- 1-gallon fuel capacity · 100 seconds trigger time
- 5.08 lbs empty — 7% lighter than Gen 1
- Slide-mount on 12mm rods · works with most heavy-lift drones
- Plasma arc ignition · runs on standard gasoline
Max Performance
Engineered for reliability and reach — the Gen 2 platform delivers more range, less weight, and faster ignition.
30ft Max Range
Shoot up to 30ft streams of fire — 20% more than Gen 1
7% Lighter
Just 5.08 lbs empty — minimal payload strain, maximum flight efficiency
Plasma Arc Ignition
High-temp instant-on spark electrodes keep it lit
Built For The Job
The TF-19 brings precision firepower to jobs that are dangerous, expensive, or simply impossible to do on foot.
Power Line Clearing
Burn off vegetation and debris from utility lines without crews on the ground.
Pest Management
Eliminate hard-to-reach nests and infestations from the air.
Fire Breaks & Back-Burns
Wildland firefighting crews can ignite remote-controlled burns without entering difficult terrain.
Agricultural Burns
Efficient remote ignition for field management and crop residue clearing.
Fight Fire With Fire
Forest fire management and prevention is both costly and dangerous. Wildland firefighting crews can avoid difficult terrain and adverse conditions while using the TF-19 to ignite remote-controlled burns.
Easy Setup, Stable Flight
Start flying quickly with the WASP system. Slide the assembly along the included 12mm rods to balance over your drone’s center of gravity. Need to refuel? Slide the system forward on the rods for easy ground access to the 1-gallon tank, then slide it back into flight position.
What’s in the Box?
Everything you need to mount and fly:
- TF-19 WASP Gen 2 attachment, fully assembled
- Two 12mm-OD × 500mm mounting rods
- Instruction and spec sheet
Used By
Not Sure Which Flamethrower Is Right For You?
See how the TF-19 stacks up against the rest of the Throwflame lineup — range, fuel system, weight, and price side-by-side.
Compare All Flamethrowers| Weight | 5 lbs |
|---|---|
| Dimensions | 42 × 7 × 9 in |
| Range | 30ft |
| Fuel Capacity | 1 gallon (3.8l) |
| Firing Time | 100 seconds |
| Operating Voltage | 9v-13v (XT30 connection) |
| Firing System Control | (1) PWM signal (Servo) |
| Igniter | Plasma arc ignition system |
| Material | Ultralite 3K carbon fiber |
| Fuel Delivery | High-efficiency performance fuel pump |
| SKU | X0009348 |
| UPC | 653485063468 |
Related products
Flamethrowers
$3,450.00
Flamethrowers
Price range: $699.00 through $899.00
Flamethrowers
$9,420.00
Flamethrowers
Price range: $1,699.00 through $1,850.00
